Wholesale High Temperature Reference Electrode Supplier – Certified Reference Material – Shandong Institute of Metallurgical Science
Wholesale High Temperature Reference Electrode Supplier – Certified Reference Material – Shandong Institute of Metallurgical Science Detail:
Table 1. Certified Values for ZBK 306 (Mass Fraction %)
|
Number |
Elements |
TFe |
FeO |
SiO2 |
Al2O3 |
CaO |
MgO |
|
ZBK 306 |
Certified Values |
65.66 |
0.54 |
1.92 |
1.64 |
0.056 |
0.102 |
|
Uncertainty |
0.17 |
0.06 |
0.04 |
0.04 |
0.006 |
0.008 |
|
|
Number |
Elements |
S |
P |
Mn |
Ti |
K2O |
Na2O |
|
ZBK 306 |
Certified Values |
0.022 |
0.060 |
0.135 |
0.048 |
0.018 |
0.007 |
|
Uncertainty |
0.001 |
0.002 |
0.003 |
0.002 |
0.002 |
0.002 |
Table 2. Analysis methods
|
Composition |
Method |
|
TFe |
Titanium(III) chloride reduction potassium dichromate titration method |
|
FeO |
Potassium dichromate titration methodThe potentiometric titrimetric method |
|
SiO2 |
Perchloric acid dehydration gravimetric methodThe silicomolybdic blue spectrophotometric methodICP-AES |
|
Al2O3 |
Complexometric titration methodThe chrome azurol S photometric methodICP-AES |
|
CaO |
ICP-AESAAS |
|
MgO |
ICP-AESAAS |
|
S |
Barium sulfate gravimetric methodThe eombustion iodometric method for the determination of sulfur content |
|
P |
Bismuth phosphomolybdate blue spectrophotometric methodICP-AES |
|
Mn |
Potassium periodate spectrophotometric methodICP-AESAAS |
|
Ti |
Diantipyryl methane photometric methodICP-AES |
|
K2O |
ICP-AES AAS |
|
Na2O |
ICP-AES AAS |
Expiration of certification: The certification of this CRM is valid until December 1, 2028.
Table 3. Methods for homogeneity testing
|
Composition |
Analysis methods |
Minimum sample (g) |
|
TFe |
Titanium(III) chloride reduction potassium dichromate titration method |
0.2 |
|
FeO |
Potassium dichromate titration method |
0.2 |
|
SiO2, Al2O3, CaO, MgO |
ICP-AES |
0.1 |
|
Mn, Ti |
ICP-AES |
0.2 |
|
P, K2O, Na2O |
ICP-AES |
0.5 |
|
S |
The eombustion iodometric method for the determination of sulfur content |
0.5 |
The certified reference material is packed in glass bottles with plastic covers. The net weight is 70 g each. It is suggested to keep dryness when stored. The certified reference material should be dried at 105℃ for 1 hour before use, then it should be taken out and cooled to room temperature.
Product detail pictures:
Related Product Guide:
Having a positive and progressive attitude to customer's fascination, our organization constantly improves our solution high-quality to fulfill the requirements of shoppers and further focuses on safety, reliability, environmental prerequisites, and innovation of Wholesale High Temperature Reference Electrode Supplier – Certified Reference Material – Shandong Institute of Metallurgical Science , The product will supply to all over the world, such as: Victoria, Saudi Arabia, Anguilla, With a wide range, good quality, reasonable prices and stylish designs, our solutions are extensively used in beauty and other industries. Our solutions are widely recognized and trusted by users and can meet continuously changing economic and social needs.
By Honorio from Egypt - 2018.06.03 10:17
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Hilda from Oman - 2018.07.26 16:51
