Wholesale Astm Reference Fuel C – Reference Material For Steel Testing – Shandong Institute of Metallurgical Science
Wholesale Astm Reference Fuel C – Reference Material For Steel Testing – Shandong Institute of Metallurgical Science Detail:
Table 1. Certified Values and Uncertainty (℃)
|
Sample Number |
Testing atmosphere |
Certified value and Uncertainty |
Characteristic Melting Temperature (℃) |
|||
|
Deformation Temperature (DT) |
Softening Temperature (ST) |
Hemispheric Temperature (HT) |
Flowing Temperature (FT) |
|||
|
SDRM 040005 579# |
Reducing |
Certified value |
1171 |
1184 |
1192 |
1217 |
|
Uncertainty |
21 |
30 |
30 |
30 |
||
|
Oxidizing |
Certified value |
1191 |
1202 |
1215 |
1250 |
|
|
Uncertainty |
26 |
30 |
33 |
15 |
||
|
SDRM 040006 580# |
Reducing |
Certified value |
1350 |
1366 |
1373 |
1389 |
|
Uncertainty |
15 |
15 |
17 |
18 |
||
|
Oxidizing |
Certified value |
1368 |
1380 |
1387 |
1419 |
|
|
Uncertainty |
21 |
23 |
24 |
26 |
||
|
SDRM 040007 581# |
Reducing |
Certified value |
1245 |
1294 |
1314 |
1374 |
|
Uncertainty |
18 |
15 |
15 |
29 |
||
|
Oxidizing |
Certified value |
1308 |
1344 |
1369 |
1409 |
|
|
Uncertainty |
23 |
20 |
17 |
15 |
||
The reducing atmosphere is obtained by introducing into the furnace the mixture gases of (50±5)% CO2 and (50±5)% H2 (in the most tests) or by sealing in the furnace the proper ratio of graphite and anthracite (in a few tests); the oxidizing atmosphere is obtained with air circulates freely through the furnace.
The certification analyses were performed according to the Chinese National Standard GB/T219-2008 by 8 qualified laboratories.
The homogeneity tests were performed according to GB/T219-2008, the results show that the homogeneity was good.
Expiration of certification: The certification of this CRM is valid until November 1, 2031.
The certified reference material is packed in glass bottles with plastic covers. The net weight is 25g each. It is suggested to keep dryness when stored. The certified reference material should be reduced in size to <0.1mm and ignited at 815℃ for 1 hour before use. This certified reference material is not applicable in the identification of the deviation of furnace temperature, the users should be sure the furnace temperature has been controlled correctly before the testing.
Product detail pictures:
Related Product Guide:
We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for Wholesale Astm Reference Fuel C – Reference Material For Steel Testing – Shandong Institute of Metallurgical Science , The product will supply to all over the world, such as: Haiti, Burundi, Malaysia, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Leona from Serbia - 2018.09.21 11:01
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Novia from Barbados - 2018.06.18 17:25
